Ion exchange technology

Ion exchange technology:

Ion exchange is one of the most effective water softening technologies. It is widely used both in domestic conditions and in industry.

The ion exchange process is a reversible chemical reaction during which an exchange of ions occurs between the medium and the surface of the ion exchanger. It acts as an water filter for home

The principle of ion exchange:

Let’s try to show the principle of work on the example of softening or cationization of water.

In the process of purification, ions that are in water (for example calcium and magnesium) “knock out” counterions (for example sodium) from the matrix and replace them. It is important to note that they are fixed stoichiometrically – one Ca 2+ ion will replace 2 Na + ions .

After most of the surface of the ion exchange resin is occupied by calcium and magnesium ions, regeneration is necessary. It consists in the treatment of ion exchange resin with a concentrated solution of reagents. In the case of water softening, this is a concentrated brine of NaCl or HCl. After washing, the solution with ions washed from the resin is discharged into the sewer and the resin can again purify the water.

Ion exchange materials:

Ionite Properties:

1. Working exchange capacity – the amount of ions that can be absorbed by a certain volume of resin, expressed in mEq / l, until the breakthrough. For example, for high-quality cation exchangers it can reach 3000 mg / l.

2. Mechanical strength (abrasion) – characterizes the ability of the ion exchanger to resist abrasion during filtration and washing, loading and unloading. The service life of some materials reaches ten years.

3. Osmotic stability – the ability to withstand changes in the composition of water without cracking granules.

4. Chemical stability – the ability of a material to withstand the effects of oxidizing agents (chlorine, nitric acid, etc.), changing the pH of the medium.

5. Thermal stability – temperature limits that will allow the loading of filters to work without destroying the granules. The operating temperature for cation exchangers reaches 150 o C, for anion exchangers – not higher than 60  o C, maximum 80  o C.

Natural ion exchangers:

As ion exchangers, both natural substances and artificially produced polymers are used.

Zeolites, some clay minerals with a silicate structure, and feldspars are very widely used as natural substances. These materials have a relatively small exchange capacity. On average, it is 3 – 5 mEq / l, rare minerals 8 – 11 mEq / l (this applies to feldspars). In modern water treatment, zeolites are not used as ion exchangers, but are widely used as mechanical water filter for home loads.

For more details click here : Ro plant price in Pakistan

Published by Faizan raza

I am a professional Article writer blogger and story writer.

Leave a Reply

Create your own website, free on WordPress.com.Create your own website.
Start free